
【国外标准】 Fixed resistors for use in electronic equipment -- Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors
本网站 发布时间:
2024-10-15
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
JIS C 5201-9:2006
标准名称:
Fixed resistors for use in electronic equipment -- Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors
英文名称:
Fixed resistors for use in electronic equipment -- Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors标准状态:
现行-
发布日期:
2006-03-25 -
实施日期:
出版语种:
- 其它标准
- 推荐标准
- ASTM D6792-23c Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM E2161-23c Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
- ASTM F2006-21 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows
- ATS 5200.476-2006 Technical Specification for plumbing and drainage products Heated water systems - Leak protection device
- ASTM E2006-22 Standard Guide for Benchmark Testing of Light Water Reactor Calculations
- AS 3998-2006 Non-destructive testing - Qualification and certification of personnel
- AS 4024.1201-2006 Safety of machinery General principles - Basic terminology and methodology
- AS 4024.1301-2006 Safety of machinery Risk assessment - Principles of risk assessment
- AS 4024.1302-2006 Safety of machinery Risk assessment - Reduction of risks to health and safety from hazardous substances emitted by machinery - Principles and specifications for machinery manufacturers
- AS 4024.1601-2006 Safety of machinery Design of controls, interlocks and guarding - Guards - General requirements for the design and construction of fixed and movable guards
- AS 4024.1702-2006 Safety of machinery Human body measurements - Principles for determining the dimensions required for openings for whole body access into machinery
- AS 4024.1703-2006 Safety of machinery Principles for determining the dimensions required for access openings
- AS 4024.1801-2006 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
- AS 4024.1902-2006 Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Displays
- AS 4024.1903-2006 Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Control actuators