
【国外标准】 Information technology - Data interchange on 90 mm Optical Disk Cartridges - Capacity: 2,3 Gbytes per Cartridge
本网站 发布时间:
2022-07-01
- INCITS/ISO/IEC 22533:2005 [R2015]
- 现行
- 定价: 1211元 / 折扣价: 1030 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This Standard defines the characteristics of 90 mm Optical Disk Cartridges (ODC) with a capacity of 2,3 GB per Cartridge. The Standard specifies only Type R/W for 2 048-byte sectors of such cartridge. Type R/W provides for data to be written, read and erased many times over the entire recording surface of the disk using the thermo-magnetic and magneto-optical effects. It is also referred to as "fully rewritable". This International Standard provides for 2 048-byte sectors only. All sectors on a disk are of the same size.
标准号:
INCITS/ISO/IEC 22533:2005 [R2015]
标准名称:
Information technology - Data interchange on 90 mm Optical Disk Cartridges - Capacity: 2,3 Gbytes per Cartridge
英文名称:
Information technology - Data interchange on 90 mm Optical Disk Cartridges - Capacity: 2,3 Gbytes per Cartridge标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS/ISO/IEC 22533:2005 (S2020) Information technology - Data interchange on 90 mm Optical Disk Cartridges - Capacity: 2,3 Gbytes per Cartridge
- 下一篇: INCITS/ISO/IEC 22536:2013 (R2020) Information technology -- Telecommunications and information exchange between systems -- Near Field Communication Interface and Protocol (NFCIP-1) -- RF interface test methods
- 推荐标准
- ASTM F665-09(2015) Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application
- ASTM F754-08(2015) Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders
- ASTM ISO/ASTM51310-22 Standard Practice for Use of a Radiochromic Optical Waveguide Dosimetry System
- ASTM ISO/ASTM51539-23 Standard Guidance for Use of Radiation-Sensitive Indicators
- ASTM ISO/ASTM51607-13 Standard Practice for Use of the Alanine-EPR Dosimetry System
- ASTM ISO/ASTM51608-15(2022) Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
- ASTM ISO/ASTM51631-20 Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
- ASTM ISO/ASTM51650-13 Standard Practice for Use of a Cellulose Triacetate Dosimetry System
- ASTM ISO/ASTM51707-15 Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
- ASTM ISO/ASTM51900-23 Standard Guidance for Dosimetry for Radiation Research
- ASTM ISO/ASTM51939-17(2022) Standard Practice for Blood Irradiation Dosimetry
- ASTM ISO/ASTM52628-20 Standard Practice for Dosimetry in Radiation Processing
- ASTM ISO/ASTM52701-13(2020) Standard Guide for Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation Processing
- ASTM ISO/ASTM52903-1-20 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials — Part 1: Feedstock materials
- ASTM ISO/ASTM52907-19 Additive manufacturing — Feedstock materials — Methods to characterize metallic powders