
【国外标准】 Standard Guide for in vitro Osteoblast Differentiation Assays
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This guidance document describes the components and conditions used for in vitro osteoblast differentiation assays that can be used to screen for the osteogenic capability of progenitor stem cells from various human or animal sources, including mixed tissue-derived connective tissue progenitor populations, or cell populations that may be selectively isolated or manipulated through culture expansion, processing, transfection, or genetic modification.4.2 The osteoblast differentiation assay may be referred to as an osteogenesis assay or a mineralization assay.4.3 It is important to carefully select the components and conditions used for in vitro osteoblast differentiation assays since high amounts of osteogenic medium components can lead to dystrophic, pathologic, or artifactual calcium-based precipitates that do not indicate differentiation of the cells in culture to functional osteoblasts (1).4 For example, when high concentrations of beta-glycerophosphate are used in the medium to function as a substrate for the enzyme alkaline phosphatase secreted by the cells, there is a marked increase in free phosphate, which then precipitates with Ca++ ions in the media to form calcium phosphate crystals independently of the differentiation status of the progenitor cell (2, 3).4.4 Alkaline phosphatase production is an early event associated with osteoblast differentiation, but it can also be stimulated in other cell types by the addition of the osteogenic supplement dexamethasone to the medium. Alkaline phosphatase enhances the formation of calcified deposits prior to their natural occurrence in bone that typically coincides with bone sialoprotein and osteocalcin expression by mineralized matrix-producing osteoblasts. These kinds of calcified/mineral deposits are thus considered dystrophic, pathologic, or artifactual because they were not initiated by a mature osteoblast. A calcium measurement, such as that described in Practice F2997 for the Quantification of Calcium Deposits in Osteogenic Culture of Progenitor Cells Using Fluorescent Image Analysis, may thus result in a potentially false interpretation of the differentiation status of osteoprogenitor cells if used in isolation without gene or protein expression data.4.5 In addition to screening for multipotentiality of undifferentiated stem cells, osteoblast differentiation assays are useful for assessing the osteoinductivity of cell culture substrates or biomaterial scaffolds or drugs or biomolecules, such as cytokines or growth factors.4.6 In vitro osteoblast differentiation assays are not predictive of in vivo bone formation, but are useful for comparison purposes to standardize performance between different types, sources or passages of progenitor cells, biomaterials, or types and concentrations of biomolecules.1.1 This document provides guidance on how to conduct in vitro osteoblast differentiation assays with progenitor stem cells including mesenchymal stromal cells.1.2 This document describes the roles of various osteogenic supplements that are added to the cell culture medium of an osteoblast differentiation assay to encourage and support the differentiation of progenitor cells into matrix-producing osteoblasts.1.3 This document provides recommendations for the concentrations of osteogenic supplements that may prevent the precipitation of artifactual mineral deposits that are not directly produced by osteoblasts, nor correlated with osteoblastic gene expression of the cells.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F3106-22
标准名称:
Standard Guide for in vitro Osteoblast Differentiation Assays
英文名称:
Standard Guide for in vitro Osteoblast Differentiation Assays标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM F3105-20 Standard Specification for Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment
- 下一篇: ASTM F3107-14(2023) Standard Test Method for Measuring Accuracy After Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems
- 推荐标准
- ASTM D4611-16 Standard Test Method for Specific Heat of Rock and Soil
- ASTM D4614-11(2019) Standard Specification for Ethyl Acetate (All Grades)
- ASTM D4616-23 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
- ASTM D4618-92(2017) Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application
- ASTM D4619-12(2018) Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems
- ASTM D4623-16 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge
- ASTM D4625-21 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
- ASTM D4626-23 Standard Practice for Calculation of Gas Chromatographic Response Factors
- ASTM D4630-19 Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
- ASTM D4631-18 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
- ASTM D4634-16(2022) Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
- ASTM D4636-17 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
- ASTM D4637/D4637M-15(2021)e1 Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane
- ASTM D4638-16(2023) Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
- ASTM D464-15(2020) Standard Test Methods for Saponification Number of Pine Chemical Products Including Tall Oil and Other Related Products