
【国外标准】 Medical Electrical Equipment - Part 2-12: Particular Requirements for the Safety of Lung Ventilators - Critical Care Ventilators (Adopted IEC 60601-2-12:03, second edition, 2001-10)
本网站 发布时间:
- CAN/CSA-C22.2 NO. 60601-2-12-03
- 现行
- 定价: 819元 / 折扣价: 697 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1 Scope and object This clause of the General Standard applies, except as follows:
1.1 Scope
Addition: This Particular Standard specifies the safety requirements
for VENTILATORS, as defined in 2.1.125, intended for use in critical care settings. Co
标准号:
CAN/CSA-C22.2 NO. 60601-2-12-03
标准名称:
Medical Electrical Equipment - Part 2-12: Particular Requirements for the Safety of Lung Ventilators - Critical Care Ventilators (Adopted IEC 60601-2-12:03, second edition, 2001-10)
英文名称:
Medical Electrical Equipment - Part 2-12: Particular Requirements for the Safety of Lung Ventilators - Critical Care Ventilators (Adopted IEC 60601-2-12:03, second edition, 2001-10)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-C22.2 NO. 60601-2-11A-01 Amendment 1:2005 to CAN/CSA-C22.2 No. 60601-2-11-01, Medical Electrical Equipment - Part 2-11: Particular Requirements for the Safety of Gamma Beam Therapy Equipment (Adopted Amendment 1:2004 to CEI/IEC 60601-2-11:1997)
- 下一篇: CAN/CSA-C22.2 NO. 60601-2-13-02 Medical Electrical Equipment - Part 2-13: Particular Requirements for the Safety of Anaesthetic Workstations (Adopted IEC 60601-2-13:1998, second edition, 1998-05, with Canadian Deviations)
- 推荐标准
- ASTM D25-12(2022) Standard Specification for Round Timber Piles
- ASTM D2559-12a(2018) Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
- ASTM D281-12(2021) Standard Test Method for Oil Absorption of Pigments by Spatula Rub-out
- ASTM D2899-12(2017) Standard Practice for Establishing Allowable Stresses for Round Timber Piles
- ASTM D2937-17e2 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
- ASTM D3174-12(2018)e1 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
- ASTM D3419-12(2019) Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
- ASTM D3657-03(2021) Standard Specification for Zipper Dimensions
- ASTM D3767-03(2020) Standard Practice for Rubber—Measurement of Dimensions
- ASTM D3864-12(2021) Standard Guide for On-Line Monitoring Systems for Water Analysis
- ASTM D3929-03(2023) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
- ASTM D3937-12(2018) Standard Test Method for Crimp Frequency of Manufactured Staple Fibers
- ASTM D3987-12(2020) Standard Practice for Shake Extraction of Solid Waste with Water
- ASTM D4111-12(2019) Standard Performance Specification for Woven Napery and Tablecloth Fabrics: Household and Institutional
- ASTM D4537-12(2018) Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities