
【国外标准】 Electrical Apparatus for Explosive Gas Atmospheres - Part 1: Flameproof Enclosures "d" (Adopted IEC 60079-1:2001, fourth edition, 2001-02, including Corrigendum 1:2001)
本网站 发布时间:
- CAN/CSA-E60079-1-02 (R2006)
- 现行
- 定价: 1502元 / 折扣价: 1277 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1. Scope
This part of IEC 60079 contains the specific requirements for the
construction and testing of electrical apparatus with the type of protection flameproof enclosure "d", intended for use in potentially explosive gas atmospheres.
2. Normative
标准号:
CAN/CSA-E60079-1-02 (R2006)
标准名称:
Electrical Apparatus for Explosive Gas Atmospheres - Part 1: Flameproof Enclosures "d" (Adopted IEC 60079-1:2001, fourth edition, 2001-02, including Corrigendum 1:2001)
英文名称:
Electrical Apparatus for Explosive Gas Atmospheres - Part 1: Flameproof Enclosures "d" (Adopted IEC 60079-1:2001, fourth edition, 2001-02, including Corrigendum 1:2001)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-E598-2-9-98 (R2003) Luminaires - Part 2: Particular Requirements - Section 9: Photo and Film Luminaires (non-professional) (Adopted IEC 598-2-9:1987, second edition, including Amendment 1:1993)
- 下一篇: CAN/CSA-E60079-5-02 (R2006) Electrical Apparatus for Explosive Gas Atmospheres - Part 5: Powder Filling "q" (Adopted CEI/IEC 60079-5:1997, second edition, 1997-04)
- 推荐标准
- ASTM D632-12(2020)e1 Standard Specification for Sodium Chloride
- ASTM D6358-19e1 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods
- ASTM D6379-21e1 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
- ASTM D6416/D6416M-16e1 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
- ASTM D6514-03(2019)e1 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
- ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
- ASTM D6557-18e1 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
- ASTM D6570-18a(2023)e1 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
- ASTM D6602-13(2022)e1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
- ASTM D664-18e2 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM D6749-02(2018) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
- ASTM D6753/D6753M-02(2023) Standard Specification for Coal Tar Adhesive
- ASTM D6764-02(2019) Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
- ASTM D6787/D6787M-02(2023) Standard Specification for Repositionable Note Pad
- ASTM D6788-02(2023) Standard Specification for Repositionable Pressure-Sensitive Flags