
【国外标准】 Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Endoscopic Equipment (Adopted CEI/IEC 601-2-18:1996, second edition, 1996-08)
本网站 发布时间:
- CAN/CSA-C22.2 NO. 60601-2-18-01 (R05)
- 现行
- 定价: 774元 / 折扣价: 658 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1 Scope and object
1.1 Scope
Addition:
This Particular Standard specifies requirements for the safety of
ENDOSCOPIC EQUIPMENT and its INTERCONNECTION CONDITIONS with ENDOSCOPICALLY-USED ACCESSORIES.
NOTE - As the General Standard does not give
标准号:
CAN/CSA-C22.2 NO. 60601-2-18-01 (R05)
标准名称:
Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Endoscopic Equipment (Adopted CEI/IEC 601-2-18:1996, second edition, 1996-08)
英文名称:
Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Endoscopic Equipment (Adopted CEI/IEC 601-2-18:1996, second edition, 1996-08)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-C22.2 NO. 60601-2-17-04 Medical Electrical Equipment - Part 2-17: Particular Requirements for the Safety of Automatically-Controlled Brachytherapy Afterloading Equipment (Adopted CEI/IEC 60601-2-17:2005, second edition, 2004-01)
- 下一篇: CAN/CSA-C22.2 NO. 60601-2-18A-01(R2009) Amendment 1:2002 to CAN/CSA-C22.2 NO. 60601-2-18-01, Medical Electrical Equipment - Part 2-18: Particular Requirements for the Safety of Endoscopic Equipment
- 推荐标准
- ASTM D6235-18 Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites
- ASTM D6245-18 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
- ASTM D6247-18 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry
- ASTM D6347/D6347M-05(2018) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
- ASTM D6438-05(2022) Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
- ASTM D6452-18(2023) Standard Guide for Purging Methods for Wells Used for Ground Water Quality Investigations
- ASTM D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
- ASTM D6499-18(2023) Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products
- ASTM D6520-18 Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds
- ASTM D6525/D6525M-18(2023) Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
- ASTM D6534-18 Standard Practice for Determining the Peak Force-to-Actuate of a Mechanical Pump Dispenser
- ASTM D6535/D6535M-18 Standard Practice for Determining the Dip Tube Length of a Mechanical Pump Dispenser
- ASTM D6536/D6536M-18 Standard Practice for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
- ASTM D6557-18e1 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
- ASTM D6570-18a(2023)e1 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber