
【国外标准】 Standard Practice for Training in the Forensic Examination of Primer Gunshot Residue (pGSR) Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 This practice is intended to be used by subject matter experts in the field of forensic pGSR analysis who have met their laboratory’s technical requirements to be assigned to the role of trainer in the category of testing that deals with the detection, analysis, and classification of pGSR particles.5.2 This practice is intended to be used in conjunction with Practice E2917, as well as the laboratory’s existing generalized training protocols, standard operating procedures, and quality practices, to develop a complete training-to-competency program in pGSR analysis by SEM/EDS. This practice provides the required additional, discipline-specific elements for pGSR analysis by SEM/EDS, in accordance with 5.3.2 of Practice E2917; it does not include the core specific elements covered in 5.3.1 of Practice E2917.5.3 The topics and procedures outlined in this practice are grounded in the body of scientific literature that exists in the field of pGSR examination.5.3.1 Additional sources of information on pGSR examination, not specifically mentioned in this document, should be considered, added, or substituted. A review of new sources of information on general forensic methods and pGSR examinations should be carried out on a regular basis (e.g. annually or biannually) to incorporate well-established current findings and methods into the training program and to replace any outdated methods.5.3.2 When possible, make additional training available to the trainee. Such training might include off-site short courses, short internships, and specialized training by experienced examiners.1.1 This practice describes the minimum requirements of a training program in primer gunshot residue (pGSR) analysis by scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS). It describes lessons, practical exercises, and progress monitoring and evaluation that should be part of a laboratory’s training program.1.2 The primary purpose of this practice is to facilitate the development and implementation of training programs in crime laboratories or other such analytical entities that participate in the detection, analysis, and classification of pGSR particles.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E3284-23
标准名称:
Standard Practice for Training in the Forensic Examination of Primer Gunshot Residue (pGSR) Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
英文名称:
Standard Practice for Training in the Forensic Examination of Primer Gunshot Residue (pGSR) Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM B1-13(2018) Standard Specification for Hard-Drawn Copper Wire
- ASTM B100-20 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
- ASTM B1002-16(2020) Standard Specification for Refined Indium
- ASTM B1003-16(2023) Standard Specification for Seamless Copper Tube for Linesets
- ASTM B1004-16(2022) Standard Practice for Contact Performance Classification of Electrical Connection Systems
- ASTM B1005-17(2023) Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)
- ASTM B1008-18 Standard Test Method for Stress-Strain Testing for Overhead Electrical Conductors
- ASTM B1010/B1010M-19 Standard Specification for Copper-Clad Steel Electrical Conductor for Tracer Wire Applications
- ASTM B1011/B1011M-22 Standard Specification for Cobalt Alloy Spring Wire
- ASTM B1013-22 Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy Thin Wall Die Castings
- ASTM B1014-20 Standard Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s)
- ASTM B1019-21 Standard Test Method for Determination of Surface Oxides on Copper Rod(for Electrical Purposes)
- ASTM B1020/B1020M-22 Standard Specification for Seamless Nickel Alloy Mechanical Tubing and Hollow Bar
- ASTM B1021-21 Standard Test Method for Peel Resistance of Metal Sheets Joined by High Strength Bonds
- ASTM B1022-22 Standard Specification for Zinc-Aluminum-Magnesium Alloys in Ingot Form for Coating Steel Sheet by the Hot-Dip Process