- 您的位置:
- 快3网下载安装到手机 >>
- 全部标准分类 >>
- 国外标准 >>
- IEEE >>
- IEEE/IEC 62704-5 IEC/IEEE International Draft Standard - Determining the power Density of the Electromagnetic Field Associated with Human Exposure to Wireless Devices Operating in Close Proximity to the Head and Body Using Computational Techniques, 6 GHz to 300 GHz

【国外标准】 IEC/IEEE International Draft Standard - Determining the power Density of the Electromagnetic Field Associated with Human Exposure to Wireless Devices Operating in Close Proximity to the Head and Body Using Computational Techniques, 6 GHz to 300 GHz
本网站 发布时间:
2025-04-28
- IEEE/IEC 62704-5
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This International Standard specifies computational procedures using Finite-Difference Time-Domain (FDTD) and Finite Element Methods (FEM) to assess the peak and spatial-averaged power density relevant to the human exposure of the human head or body from devices operating between 6 GHz and 300 GHz. It applies to devices with radiating structures at distances up to and including 200 mm. This includes but is not limited to mobile phones, tablets, and wearables. This standard provides a… read more conservative estimate of the power density of the exposure of the head or body for a significant majority of persons during normal use of these devices. read less
标准号:
IEEE/IEC 62704-5
标准名称:
IEC/IEEE International Draft Standard - Determining the power Density of the Electromagnetic Field Associated with Human Exposure to Wireless Devices Operating in Close Proximity to the Head and Body Using Computational Techniques, 6 GHz to 300 GHz
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: IEEE 3002.7-2018 IEEE Recommended Practice for Conducting Motor-Starting Studies and Analysis of Industrial and Commercial Power Systems
- 下一篇: IEEE 1900.1-2019 IEEE Standard for Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management
- 推荐标准
- AS 2888.5-1986 Methods of testing plastics waste fittings Trap seal test
- AS 2891.5-1993 Methods of sampling and testing asphalt Determination of stability and flow - Marshall procedure
- AS 2891.5-2004 Methods of sampling and testing asphalt Determination of stability and flow - Marshall procedure
- AS 3007.5-1987 Electrical installations - Surface mines and associated processing plant Operating requirements
- AS 3007.5-2004 Electrical installations - Surface mines and associated processing plant Operating requirements
- AS 3200.2.5-1992 Approval and test specification - Medical electrical equipment Particular requirements for safety - Ultrasonic therapy equipment
- AS 3565.5-2004 Meters for water supply Water meters with two integral single check valves
- AS 3580.5.1-2011 Methods for sampling and analysis of ambient air Determination of oxides of nitrogen - Direct-reading instrumental method
- AS 3637.5-1989 Underground mining - Winding suspension equipment Rope swivels and swivel hooks
- AS 3706.5-1994 Geotextiles - Methods of test Determination of puncture resistance - Drop cone method
- AS 3706.5-2014 Geotextiles - Methods of test Determination of puncture resistance - Drop cone method
- AS 3711.5-2000 Freight containers Thermal containers
- AS 3730.5-1992 Guide to the properties of paints for buildings Solvent-borne - Interior - Semi-gloss
- AS 3778.2.5-1991 Measurement of water flow in open channels General - Guidelines for the selection of flow gauging structures
- AS 3778.5.1-1991 Measurement of water flow in open channels Dilution methods - Constant-rate injection method for the measurement of steady flow