
【国外标准】 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This specification covers annealed and intermediate tempered round aluminum wires suitable for electrical purposes like stranding into conductors or for solid single conductors, either bare or insulated. The tempers covered here are 1350-O, 1350-H12 or 1350-H22, 1350-H14 or 1350-H24, 1350-H16 or 1350-H26, and 1350-H142 or 1350-H242. Materials shall be made from drawing stock in which the manufacturer shall have the option of producing the intermediate tempers by either strain-hardening only, by strain-hardening and partial annealing. The wires shall adhere to standard nominal diameters, cross-sectional areas, masses per unit length, and densities. Wires shall also be tested to evaluate their conformance to specified values of tensile strength and electrical resistivity.1.1 This specification covers aluminum 1350-O (annealed), 1350-H12 or -H22 (1/4 hard), 1350-H14 or -H24 (1/2 hard), 1350-H16 or -H26 (3/4 hard) and 1350-H142 or -H242 (1/2 hard), suitable for stranding into conductors or for solid single conductors, either bare or insulated (see Table 1 or Table 2).1.2 The values stated in inch-pound units or SI units are to be regarded separately as standard. The values in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.1.2.1 For density, resistivity, and temperature, the values stated in SI units are to be regarded as standard.NOTE 1: Prior to 1975, aluminum 1350 was designated as EC-aluminum.NOTE 2: The aluminum and temper designations conform to ANSI H35.1. Aluminum 1350 corresponds to Unified Numbering System A91350 in accordance with Practice E527.1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM B609/B609M-12(2021)
标准名称:
Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
英文名称:
Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS/NZS 1580.481.1.12:1998 (R2013) Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of colour change
- AS/NZS 1766.2.12:2002 Food microbiology Examination for specific organisms - Escherichia coli in bivalve molluscs - Rapid method
- AS/NZS 3350.2.12:1997/Amdt 2:2001 Safety of household and similar electrical appliances Particular requirements - Warming plates and similar appliances
- AS/NZS 3350.2.12:1997/Amdt 3:2007 Safety of household and similar electrical appliances Particular requirements for warming plates and similar appliances (IEC 60335-2-12:1992)
- AS/NZS 3750.12:1996 (R2013) Paints for steel structures Alkyd/micaceous iron oxide
- AS/NZS 4524.12:1998 Bonded abrasive products - Dimensions Grinding wheels for deburring and fettling on a straight grinder
- AS/NZS 4695.2.12:1996 Fire hazard testing of electrotechnical products Test methods - Glow-wire flammability test on materials
- AS/NZS 60079.12:2000 Electrical apparatus for explosive gas atmospheres Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
- AS/NZS 60695.2.12:2001 Fire hazard testing Glowing/hot wire based test methods - Glow-wire flammability test method for materials
- AS/NZS 60745.2.12:2003 Hand-held motor-operated electric tools - Safety - Particular requirements for concrete vibrators
- AS/NZS CISPR 12:2009 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers
- ASC X9 TR 52-2021 Unsigned Items Including Remotely Created Checks (RCC) - Design and Usage Guide
- ASC X9 TR 54-2021 Blockchain Risk Assessment Framework
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities