
【国外标准】 Addenda 2 to ANSI Z21.10.1-2004/CSA 4.1-2004, Gas Water Heaters - Volume 1, Storage Water Heaters With Input Ratings of 75,000 Btu Per Hour or Less
本网站 发布时间:
- ANSI Z21.10.1b-2006/CSA 4.1b-2006
- 现行
- 定价: 728元 / 折扣价: 619 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 Scope
1.1.1This standard applies to newly produced, automatic storage water
heaters having input ratings of 75,000 Btu per hour (21 980 W) or less (see Part IV, Definitions), hereinafter referred to as water heaters or appliances, constructed enti
标准号:
ANSI Z21.10.1b-2006/CSA 4.1b-2006
标准名称:
Addenda 2 to ANSI Z21.10.1-2004/CSA 4.1-2004, Gas Water Heaters - Volume 1, Storage Water Heaters With Input Ratings of 75,000 Btu Per Hour or Less
英文名称:
Addenda 2 to ANSI Z21.10.1-2004/CSA 4.1-2004, Gas Water Heaters - Volume 1, Storage Water Heaters With Input Ratings of 75,000 Btu Per Hour or Less标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: ANSI Z21.10.1a-2009/CSA 4.1a-2009 Addenda to ANSI Z21.10.1a-2009/CSA 4.1a-2009 ANSI Z21.10.1-2009/CSA 4.1-2009, Gas water heaters - Volume I, storage water heaters with input ratings Of 75,000 Btu per hour or less
- 下一篇: ANSI Z21.10.3-2004/CSA 4.3-2004 Gas Water Heaters - Volume III, Storage Water Heaters With Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous
- 推荐标准
- ASTM A799/A799M-10(2020) Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
- ASTM A835/A835M-10(2020) Standard Specification for Sizes of Ferroalloys and Alloy Additives
- ASTM B1-13(2018) Standard Specification for Hard-Drawn Copper Wire
- ASTM B100-20 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
- ASTM B1002-16(2020) Standard Specification for Refined Indium
- ASTM B1003-16(2023) Standard Specification for Seamless Copper Tube for Linesets
- ASTM B1004-16(2022) Standard Practice for Contact Performance Classification of Electrical Connection Systems
- ASTM B1005-17(2023) Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)
- ASTM B1008-18 Standard Test Method for Stress-Strain Testing for Overhead Electrical Conductors
- ASTM B1010/B1010M-19 Standard Specification for Copper-Clad Steel Electrical Conductor for Tracer Wire Applications
- ASTM B1011/B1011M-22 Standard Specification for Cobalt Alloy Spring Wire
- ASTM B1013-22 Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy Thin Wall Die Castings
- ASTM B1014-20 Standard Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s)
- ASTM B1019-21 Standard Test Method for Determination of Surface Oxides on Copper Rod(for Electrical Purposes)
- ASTM B1020/B1020M-22 Standard Specification for Seamless Nickel Alloy Mechanical Tubing and Hollow Bar