
【国外标准】 Fixed Capacitors for Use in Electronic Equipment - Part 1: Generic Specification (Adopted IEC 384-1:1982, second edition, including Amendment 1:1985, Amendment 2:1987, Amendment 3:1989 and Amemdmemt 4:1992)
本网站 发布时间:
- CAN/CSA-E384-1-95 (R1999)
- 现行
- 定价: 1320元 / 折扣价: 1122 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1. Scope
This standard is applicable to fixed capacitors for use in electronic
equipment.
It establishes standard terms, inspection procedures and methods of
test for use in sectional and detail specifications for Qualification Approval and for Qual
标准号:
CAN/CSA-E384-1-95 (R1999)
标准名称:
Fixed Capacitors for Use in Electronic Equipment - Part 1: Generic Specification (Adopted IEC 384-1:1982, second edition, including Amendment 1:1985, Amendment 2:1987, Amendment 3:1989 and Amemdmemt 4:1992)
英文名称:
Fixed Capacitors for Use in Electronic Equipment - Part 1: Generic Specification (Adopted IEC 384-1:1982, second edition, including Amendment 1:1985, Amendment 2:1987, Amendment 3:1989 and Amemdmemt 4:1992)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-E342-1-95 (R2001) Safety Requirements for Electric Fans and Regulators - Part 1: Fans and Regulators for Household and Similar Purposes (Adopted IEC 342-1:1981, second edition, including Amendment 1:1982)
- 下一篇: CAN/CSA-E384-14-1-95 (R2004) Fixed Capacitors for Use in Electronic Equipment - Part 14: Blank Detail Specification: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains - Assessment Level D (Adopted IEC 384-14-1:1993, second edition)
- 推荐标准
- ASTM D632-12(2020)e1 Standard Specification for Sodium Chloride
- ASTM D6358-19e1 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods
- ASTM D6379-21e1 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
- ASTM D6416/D6416M-16e1 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
- ASTM D6514-03(2019)e1 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
- ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
- ASTM D6557-18e1 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
- ASTM D6570-18a(2023)e1 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
- ASTM D6602-13(2022)e1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
- ASTM D664-18e2 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM D6794-20e1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time
- ASTM D6795-19ae1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time
- ASTM D6796-21e1 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
- ASTM D6808-02(2018)e1 Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
- ASTM D7076-10(2021)e1 Standard Test Method for Measurement of Shives in Retted Flax