【国外标准】 Standard Test Method for Performance of Conveyor Broilers

5.1 The energy input rate test is used to confirm that the conveyor broiler is operating properly prior to further testing.5.2 Preheat energy and time can be useful to food service operators to manage power demands and to know how quickly the conveyor broiler can be ready for operation.5.3 Idle energy rate and pilot energy rate can be used to estimate energy consumption during non-cooking periods.5.4 Temperature uniformity of the broiler cavity may be used by food service operators to understand the heat distribution throughout the broiler cavity and select a conveyor broiler that matches their required temperature characteristics.5.5 Cooking energy efficiency is a precise indicator of conveyor broiler energy performance while cooking a typical food product under various loading conditions. If energy performance information is desired using a food product other than the specified test food, the test method could be adapted and applied. Energy performance information allows an end user to better understand the operating characteristics of a conveyor broiler.5.6 Cooking uniformity of the broiler may be used by food service operates to select a conveyor broiler that provides a uniformly cooked product.5.7 Production capacity information can help an end user to better understand the production capabilities of a conveyor broiler as it is used to cook a typical food product and this could help in specifying the proper size and quantity of equipment. If production information is desired using a food product other than the specified test food, the test method could be adapted and applied.1.1 This test method evaluates the energy consumption and cooking performance of conveyor broilers. The food service operator can use this evaluation to select a conveyor broiler and understand its energy consumption.1.2 This test method is applicable to gas, electric, and hybrid gas/electric conveyorized broilers. This test method covers both units with continuously operating conveyors and batch-style units with intermittently operating conveyors.1.3 The conveyor broiler can be evaluated with respect to the following (where applicable):1.3.1 Energy input rate (see 10.2),1.3.2 Preheat energy consumption and time (see 10.3),1.3.3 Idle energy rate and temperature uniformity (see 10.4),1.3.4 Pilot energy rate (if applicable) (see 10.5), and1.3.5 Cooking energy efficiency, cooking uniformity and production capacity (see 10.8 and 10.9).1.4 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.