
【国外标准】 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 The primary function of a hydraulic fluid is to transmit power. This practice provides uniform guidelines for comparing fluids in terms of their power-transmitting abilities as reflected in their effect on hydraulic system or component efficiency and productivity.5.2 Practical advantages of enhanced hydraulic system efficiency may include increased productivity (faster machine cycle time), reduced power consumption (electricity or fuel), and reduced environmental impact (lower emissions).5.3 Differences in fluid performance may be relatively small. Consequently, it is essential that the necessary experimental controls are implemented to ensure consistency in operating conditions and duty cycle when comparing the energy efficiency of different hydraulic fluid formulations.5.4 This practice implies no evaluation of hydraulic fluid quality other than its effect on hydraulic system efficiency.1.1 This practice covers all types and grades of hydraulic fluids.1.2 This practice is applicable to both laboratory and field evaluations.1.3 This practice provides guidelines for conducting hydraulic fluid evaluations. It does not prescribe a specific efficiency test methodology.1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D7721-22
标准名称:
Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
英文名称:
Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 7240.22-2008 Fire detection and alarm systems Smoke-detection equipment for ducts (ISO 7240-22:2007, MOD)
- AS/NZS 1462.22:1997 Methods of test for plastics pipes and fittings Method for the determination of pipe stiffness
- AS/NZS 2341.22:1996 (R2013) Methods of testing bitumen and related roadmaking products Determination of particle charge
- AS/NZS 4266.22:1996 Reconstituted wood-based panels - Methods of test Determination of porosity of laminated surface
- AS/NZS 60745.2.22:2011/Amdt 1:2012 Hand-held motor-operated electric tools Safety - Particular requirements for cut-off machines (IEC 60745-2-22 Ed 1, MOD)
- AS/NZS CISPR 22:2004 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
- AS/NZS IEC 60670.22:2012 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Particular requirements for connecting boxes and enclosures
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
- ASTM A1-00(2018) Standard Specification for Carbon Steel Tee Rails
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM A1001-18 Standard Specification for High-Strength Steel Castings in Heavy Sections
- ASTM A1002-16(2020) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
- ASTM A1004/A1004M-99(2018) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
- ASTM A1009-18 Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications