我的标准
购物车
400-168-0010
- 您的位置：
- 快3网下载安装到手机 >>
- 全部标准分类 >>
- 国外标准 >>
- ITU >>
- ITU-R SM.1755 Characteristics of ultra-wideband technology
标准简介标准号：
ITU-R SM.1755
标准名称：
Characteristics of ultra-wideband technology
英文名称：
标准状态：
现行-
发布日期：
2015-05-01 -
实施日期：
出版语种：
- 其它标准
- 上一篇： ITU-T Q.554 Transmission characteristics at digital interfaces of digital exchanges
- 下一篇： ITU-T V.26ter 2400 bits per second duplex modem using the echo cancellation technique standardized for use on the general switched telephone network and on point-to-point 2-wire leased telephone-type circuits
- 推荐标准
- AS ISO 15489.2-2002 (R2013) Records management Guidelines
- AS ISO/IEC 17025-2005 (R2016)/Amdt 1-2006 General requirements for the competence of testing and calibration laboratories
- AS/NZS 1170.1:2002 (R2016)/Amdt 1:2005 Structural design actions Permanent, imposed and other actions
- AS/NZS 1170.1:2002 (R2016)/Amdt 2:2009 Structural design actions Permanent, imposed and other actions
- AS/NZS 1301.001s:2002 (R2013) Methods of test for pulp and paper Basic density of pulpwood
- AS/NZS 1301.012s:2003 (R2013) Methods of test for pulp and paper Organic solvent extractives in wood, pulp and paper
- AS/NZS 1301.201s:2002 (R2013) Methods of test for pulp and paper Kappa number of pulp
- AS/NZS 1301.210s:2002 (R2013) Methods of test for pulp and paper Alkali solubility of pulp
- AS/NZS 1301.400s:1998 (R2013) Methods of test for pulp and paper Tearing resistance of paper
- AS/NZS 1301.404s:1998 (R2013) Methods of test for pulp and paper Tensile strength of paper and board (constant rate of loading method)
- AS/NZS 1301.434s:1997 (R2013) Methods of test for pulp and paper Crush resistance of corrugating medium
- AS/NZS 1301.449s:1997 (R2013) Methods of test for pulp and paper Description of crush testing equipment
- AS/NZS 1301.453s:1998 (R2013) Methods of test for pulp and paper Bending resistance of paper and board - Constant rate of deflection
- AS/NZS 1580.101.5:1999 (R2013) Paints and related materials - Methods of test - Conditions of test - Temperature and humidity control
- AS/NZS 1580.202.1:1995 (R2013) Paints and related materials - Methods of test - Density
