
【国外标准】 IEEE Standard Test Procedures for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V
本网站 发布时间:
2025-04-28
- IEEE C37.09-2018
- 定价: 152元 / 折扣价: 130 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This standard applies to ac high-voltage circuit breakers with rated maximum voltage above 1000 V. It defines various tests that are made on ac high-voltage circuit breakers, except for generator circuit breakers, which are covered in IEC/IEEE 62271-37-013:2015 (formerly IEEE Std C37.013(TM)-1997). It specifies the tests and describes the accepted methods used to verify assigned ratings defined in IEEE Std C37.04(TM). It also describes the test procedures associated with production and field installation. The test procedures are divided into the following classifications: a) Design tests; b) Production tests; c) Conformance tests; d) Field tests. NOTE--Design tests are referred to as “Type” tests, and Production tests are referred to as “Routine” tests in IEC standards.
标准号:
IEEE C37.09-2018
标准名称:
IEEE Standard Test Procedures for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: IEEE 859-2018 IEEE Standard Terms for Reporting and Analyzing Outage Occurrences and Outage States of Electrical Transmission Facilities
- 下一篇: IEEE/ISO/IEC 12207-2 ISO/IEC/IEEE Draft International Standard - Systems and Software Engineering -- Software Life Cycle Processes -- Part 2: Relation and Mapping Between ISO/IEC/IEEE 12207-1:2017 and ISO/IEC/IEEE 12207:2008
- 推荐标准
- ASTM D7402-09(2017) Standard Practice for Identifying Cationic Emulsified Asphalts
- ASTM D7489-09(2017) Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
- ASTM D7498/D7498M-09(2022) Standard Test Method for Vertical Strip Drains Using a Large-Scale Consolidation Test
- ASTM D7512-09(2023) Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
- ASTM D7538-09(2023) Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device
- ASTM D7540-09(2019) Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller
- ASTM D7579-09(2019) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
- ASTM D7663-12(2018)e1 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
- ASTM D7664-10(2018)e1 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
- ASTM D7729-12(2018)e1 Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
- ASTM D7768-12(2018) Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography
- ASTM D7777-13(2018)e1 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
- ASTM D7821-12(2018) Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)
- ASTM D7858-13(2018) Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
- ASTM D7879-13(2018) Standard Test Method for Determining Flax Fiber Widths Using Image Analysis