
【国外标准】 Information technology - BIOS Enhanced Disk Drive Services - 4 (EDD-4)
本网站 发布时间:
2024-08-08
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This standard assumes that the reader is familiar with the conventional INT 13h interface, the usage of the BIOS Device Parameter Table, and the basic operation of mass storage devices. This standard describes in detail BIOS functions and data structures that are used as an abstraction layer to allow higher-level applications to access mass storage devices in an interface and command-set independent manner. To comply with this standard, higher-level software shall call the INT functions using the data structures described herein, and system firmware shall provide the INT functions and data structures described herein.
标准号:
INCITS 480-2011 (S2021)
标准名称:
Information technology - BIOS Enhanced Disk Drive Services - 4 (EDD-4)
英文名称:
Information technology - BIOS Enhanced Disk Drive Services - 4 (EDD-4)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM F3273-17(2021)e1 Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700)
- ASTM F585-16(2021) Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
- ASTM F667/F667M-16(2021) Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
- ASTM F746-04(2021) Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
- ASTM F913-02(2021) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
- ASTM G141-09(2021) Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
- ASTM G152-13(2021) Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G153-13(2021) Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G188-05(2021) Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
- ASTM G189-07(2021)e1 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
- ASTM G21-15(2021)e1 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
- ASTM G38-01(2021) Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
- ASTM G5-14(2021) Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
- ASTM G64-99(2021) Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
- ASTM G75-15(2021) Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)