【国外标准】 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis

4.1 The accuracy of many analytical measurements is dependent upon the manner in which the standard solutions are prepared and stored, and the accuracy with which they are standardized. Combining the methods recommended for the preparation and handling of such solutions into one practice eliminates the necessity for covering such details in all of the methods wherein the solutions are used.1.1 This practice covers procedures for the preparation, standardization, and storage of the standard volumetric solutions and reagent testing solutions commonly used in chemical analysis.1.2 The information in this practice is arranged as follows:  SectionsReferenced Documents 2Terminology 3 4Apparatus 5Temperature effects 6Measurements 7Reagents 8Concentration of solutions 9Mixing of solutions 10Storage of solutions 11Preparation and standardization of solutions 12Precision and Bias 13Sodium hydroxide solution, 0.02 to 1.0 meq/mL (N) 14 to 19Hydrochloric acid, 0.02 to 1.0 meq/mL (N) 20 to 28Sulfuric acid, 0.02 to 1.0 meq/mL (N) 29 to 33Hydrochloric acid, special 1 meq/mL (N) 34 to 38Sulfuric acid, special 1 meq/mL (N) 39 to 43Silver nitrate solution, 0.1 meq/mL (N) 44 to 48Ammonium thiocyanate solution, 0.1 meq/mL (N) 49 to 53Iodine solution, 0.1 meq/mL (N) 54 to 58Sodium thiosulfate solution, 0.1 meq/mL (N) 59 to 63Potassium permanganate solution, 0.1 meq/mL (N) 64 to 68Potassium dichromate solution, 0.1 meq/mL(N) 69 to 73Methanolic sodium hydroxide solution, 0.5 meq/mL (N) 74 to 79Ceric sulfate solution, 0.1 meq/mL (N) 80 to 84Acetous perchloric acid, 0.1 meq/mL (N) 85 to 89Disodium ethylenediaminetetraacetate solution, 0.05 mol/L(M) 90 to 94Standard ion solutions 95Nonstandardized reagent solutions and indicator solutions 961.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given throughout this practice. Consult current OSHA regulations, suppliers’ Safety Data Sheets, and local regulations for all materials used in this specification.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.