- 您的位置:
- 快3网下载安装到手机 >>
- 全部标准分类 >>
- 国外标准 >>
- CSA >>
- CAN/CSA-C22.2 NO. 60601-2-1A-01 Amendment 1:2003 to CAN/CSA-C22.2 NO. 60601-2-1-01, Medical Electrical Equipment - Part 2-1: Particular Requirements for the Safety of Electron Accelerators in the Range 1 MeV to 50 MeV (Adopted Amendment 1:2002 to CEI/IEC 60601-2-1:1998)

【国外标准】 Amendment 1:2003 to CAN/CSA-C22.2 NO. 60601-2-1-01, Medical Electrical Equipment - Part 2-1: Particular Requirements for the Safety of Electron Accelerators in the Range 1 MeV to 50 MeV (Adopted Amendment 1:2002 to CEI/IEC 60601-2-1:1998)
本网站 发布时间:
- CAN/CSA-C22.2 NO. 60601-2-1A-01
- 现行
- 定价: 228元 / 折扣价: 194 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
INTRODUCTION
Subclause 29.3.1.1 of IEC 60601-2-1:1998 sets limits to X-ray leakage
radiation through beam limiting devices (BLDs) in the patient plane in order to reduce the detrimental effects on the patient due to leakage radiation. This clause restr
标准号:
CAN/CSA-C22.2 NO. 60601-2-1A-01
标准名称:
Amendment 1:2003 to CAN/CSA-C22.2 NO. 60601-2-1-01, Medical Electrical Equipment - Part 2-1: Particular Requirements for the Safety of Electron Accelerators in the Range 1 MeV to 50 MeV (Adopted Amendment 1:2002 to CEI/IEC 60601-2-1:1998)
英文名称:
Amendment 1:2003 to CAN/CSA-C22.2 NO. 60601-2-1-01, Medical Electrical Equipment - Part 2-1: Particular Requirements for the Safety of Electron Accelerators in the Range 1 MeV to 50 MeV (Adopted Amendment 1:2002 to CEI/IEC 60601-2-1:1998)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-C22.2 NO. 60601-2-18A-01(R2009) Amendment 1:2002 to CAN/CSA-C22.2 NO. 60601-2-18-01, Medical Electrical Equipment - Part 2-18: Particular Requirements for the Safety of Endoscopic Equipment
- 下一篇: CAN/CSA-C22.2 NO. 60601-2-2-01 Medical Electrical Equipment - Part 2-2: Particular Requirements for the Safety of High Frequency Surgical Equipment (Adopted IEC 60601-2-2:1998, third edition, 1998-09)
- 推荐标准
- ASTM D2320-98(2022)e1 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
- ASTM D2453-15(2020)e1 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
- ASTM D2487-17e1 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
- ASTM D2488-17e1 Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)
- ASTM D2509-20ae1 Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)
- ASTM D2523/D2523M-13(2019)e1 Standard Practice for Testing Load-Strain Properties of Roofing Membranes
- ASTM D256-23e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
- ASTM D2574-16(2020)e1 Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms
- ASTM D2651-01(2016) Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
- ASTM D2672-20e1 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement
- ASTM D280-01(2023) Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments
- ASTM D2844/D2844M-18e1 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
- ASTM D2937-17e2 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
- ASTM D2989-01(2022) Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures
- ASTM D3021-01(2019) Standard Specification for Phthalocyanine Green Pigments