
【国外标准】 Amendment 1:2002 to CAN/CSA-E691-94, Thermal-Links - Requirements and Application Guide (Adopted Amendment 1:1995 to CEI/IEC 691:1993)
本网站 发布时间:
- CAN/CSA-E691A-94 (R2002)
- 现行
- 定价: 319元 / 折扣价: 272 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
FOREWORD This amendment has been prepared by sub-committee 32C: Miniature fuses,
of IEC technical committee 32: Fuses.
AVANT-PROPOS
Le present amendement a ete etabli par le sous-comite 32C:
Coupe-circuit a fusibles miniatures, du comite d'etudes 32
标准号:
CAN/CSA-E691A-94 (R2002)
标准名称:
Amendment 1:2002 to CAN/CSA-E691-94, Thermal-Links - Requirements and Application Guide (Adopted Amendment 1:1995 to CEI/IEC 691:1993)
英文名称:
Amendment 1:2002 to CAN/CSA-E691-94, Thermal-Links - Requirements and Application Guide (Adopted Amendment 1:1995 to CEI/IEC 691:1993)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-E691-94 (R2004) Thermal-Links - Requirements and Application Guide (Adopted IEC 691:1993, second edition, with Canadian deviations)
- 下一篇: CAN/CSA-E691B-94 (R2002) Amendment 2 to CAN/CSA-E691-94 (R2002), Thermal-Links - Requirements and Application Guide (Adopted IEC 691:1993, second edition, with Canadian deviations)
- 推荐标准
- ASTM D632-12(2020)e1 Standard Specification for Sodium Chloride
- ASTM D6358-19e1 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods
- ASTM D6379-21e1 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
- ASTM D6416/D6416M-16e1 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
- ASTM D6514-03(2019)e1 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
- ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
- ASTM D6557-18e1 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
- ASTM D6570-18a(2023)e1 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
- ASTM D6602-13(2022)e1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
- ASTM D664-18e2 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM D6794-20e1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time
- ASTM D6796-21e1 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
- ASTM D6808-02(2018)e1 Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
- ASTM D7076-10(2021)e1 Standard Test Method for Measurement of Shives in Retted Flax
- ASTM D7105/D7105M-06(2019)e1 Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems