
【国外标准】 Standard Performance Specification for Urinary Intermittent Catheters
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 This performance specification establishes performance requirements for the short-term utilization of a single-use, non-balloon- urinary catheter, French sizes 12 through 30 inclusive, used by the medical professions for providing a method of bladder drainage through the urethra. The product is manufactured in various sizes and materials such as latex, silicone, rubber, and various polymers (as well as combinations of these) and is provided non-sterile and sterile for single use only. The non-sterile catheters should be sterilized.1.2 Catheters whose surface has been chemically treated to effect biocompatibility or microbial properties may be tested to this specification. The safety and effectiveness of antimicrobial coatings or their incorporation into device polymer materials are not within the scope of this specification.1.3 Catheters whose surface has been chemically treated to enhance their lubricity may be tested to this specification.1.4 Regulatory bodies may require additional information, such as clinical data, to support the subject products of this standard.1.5 Exclusions—Catheters for non-urethral catheterization, such as for nephrostomy, suprapubic cystostomy, ureterostomy, gastrostomy, enemas, and so forth, are excluded from the scope of this specification.1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D8389-21
标准名称:
Standard Performance Specification for Urinary Intermittent Catheters
英文名称:
Standard Performance Specification for Urinary Intermittent Catheters标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM D8388/D8388M-22 Standard Practice for Flexural Residual Strength Testing of Damaged Sandwich Constructions
- 下一篇: ASTM D8391-22e1 Standard Specification for Demonstrating Equivalent Fire Performance for Wood-Based Floor Framing Members to Unprotected 2 by 10 Dimension Lumber or Equal-Sized Structural Composite Lumber
- 推荐标准
- INCITS/ISO/IEC 14496-5:2001/AM 21:2009 [R2016] Information technology -- Coding of audio-visual objects -- Part 5: Reference software - Amendment 21: Frame-based Animated Mesh Compression reference software
- INCITS/ISO/IEC 21000-21:2017 (2021) Information technology - Multimedia framework (MPEG-21) - Part 21: Media contract ontology
- INCITS/ISO/IEC 23000-21:2019 (2021) Information technology - Multimedia application format (MPEG-A) - Part 21: Visual identity management application format
- ASTM D8137-18(2023) Practice for Accelerated Aging of Leather
- ASTM D8138-23 Standard Specification for Preformed Silicone Joint Sealing System for Bridges
- ASTM D8139-23 Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction
- ASTM D814-95(2020) Standard Test Method for Rubber Property—Vapor Transmission of Volatile Liquids
- ASTM D8140-18(2023) Standard Guide for the Use of Foundry Sand in Asphalt Mixtures
- ASTM D8141-22 Standard Guide for Selecting Volatile Organic Compounds (VOCs) and Semi-Volatile Organic Compounds (SVOCs) Emission Testing Methods to Determine Emission Parameters for Modeling of Indoor Environments
- ASTM D8144-22 Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography
- ASTM D8148-22 Standard Test Method for Spectroscopic Determination of Haze in Fuels
- ASTM D8149-20 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
- ASTM D8150-22 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
- ASTM D8152-18 Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test
- ASTM D8154-24 Standard Test Methods for 1H-NMR Determination of Ketone-Ethylene-Ester and Polyvinyl Chloride Contents in KEE-PVC Roofing Fabrics