
【国外标准】 Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 This practice is intended for use as a voluntary standard by parties who wish to undertake the seismic risk assessment of properties. The goal is for users to objectively and reliably compare the financial risks of earthquake damage to buildings, or groups of buildings, on a consistent basis.5.2 This practice is designed to provide requirements for the evaluation of earthquake damage risk so that technical reports prepared for the evaluation and rating of seismic risk of a building(s) will be adequate for use by other entities. Potential users including, but are not be limited to, those making equity investments, lending, and financial transactions, including securitized mortgage lending by mortgage originators, loan servicers, underwriters, rating agencies, and purchasers of bonds secured by the real estate.5.3 The use of this practice may permit a user to satisfy, in part, their requirements for due diligence in assessing a property's potential for losses associated with earthquakes for real estate transactions.1.1 This practice establishes standard-of-care for evaluation and classification of the financial risks from earthquake damage to real estate improvements for use in financial mortgage transactions and capital investment evaluation. As such, this practice permits a user to satisfy, in part, their real estate transaction due-diligence requirements with respect to assessing and characterizing a property’s potential losses from earthquakes. This practice is intended to address only physical damage to the property from site and building response.1.1.1 Hazards addressed in this practice include earthquake ground shaking, earthquake-caused site instability, including faulting, subsidence, settlement landslides and soil liquefaction, earthquake-caused tsunamis and seiches, and earthquake-caused flooding from dam or dike failures.1.1.2 Earthquake-caused fires and toxic materials releases are not hazards considered in this practice.1.1.3 This practice does not purport to provide for the preservation of life safety, or prevention of building damage associated with its use, or both.1.1.3.1 This practice does not address requirements of any federal, state, or local laws and regulations of building construction or maintenance. Users are cautioned that current federal, state, and local laws and regulations may differ from those in effect at the times of construction or modification of the building(s), or both.1.1.3.2 This practice does not address the contractual and legal obligations between prior and subsequent Users of seismic risk assessment reports or between providers who prepared the report and those who would like to use such prior reports.1.1.3.3 This practice does not address the contractual and legal obligations between a provider and a user, and other parties, if any.1.1.4 It is the responsibility of the owner of the building(s) to establish appropriate life-safety and damage prevention practices and determine the applicability of current regulatory limitations prior to use.1.2 Considerations not included in the scope: the impacts of damage to contents, loss of income(s), rents, or other economic benefits of use of the property, or from legal judgments, fire sprinkler water-induced damage or fire.1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
标准号:
ASTM E2557-16a
标准名称:
Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments
英文名称:
Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM F2783-20 Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada
- ASTM F2787-13(2018) Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
- ASTM F2789-10(2020) Standard Guide for Mechanical and Functional Characterization of Nucleus Devices
- ASTM F2790-10(2019)e1 Standard Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses
- ASTM F2791-24 Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions
- ASTM F2793-14(2023) Standard Specification for Bicycle Grips
- ASTM F2795-18 Standard Test Method for Performance of Self-Contained Soft Serve and Shake Freezers
- ASTM F2797-19 Standard Test Method for Evaluating Edge Cleaning Effectiveness of Vacuum Cleaners
- ASTM F2798-09(2023) Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
- ASTM F2799-14(2019) Standard Practice for Maintenance of Aircraft Electrical Wiring Systems
- ASTM F2810-15(2020) Standard Specification for Elliptical Trainers
- ASTM F2817-13(2023) Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
- ASTM F2818-10(2023) Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
- ASTM F2821-15(2020) Standard Test Methods for Basket Type Rescue Litters
- ASTM F2822-10(2024) Standard Specification for Fixed Anchorages Installed on Structures Used for Rope Rescue Training