
【国外标准】 Standard Guide for Hazard Awareness for Search and Rescue Personnel
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This guide establishes the minimum level of training required to provide awareness-level knowledge for personnel operating in and around the areas and operations listed in 1.1.4.2 This guide may be used by individuals and AHJs that wish to identify the minimum training standards for land-based personnel operating in and around these areas and operations.4.3 A person trained to this guide is considered to be aware of the hazards and risks associated with these areas and operations.4.4 A person trained solely to this guide is not considered a “searcher,” “rescuer,” or both.4.5 This guide may be used to augment other training for a searcher and/or rescuer.4.6 This guide by itself is not a training document. It is only an outline of some of the topics required for training or evaluating a searcher and/or rescuer, although it can be used to develop a training document or program.4.7 It is the responsibility of the AHJ to determine the depth or detail of training needed to meet its training requirements.4.8 Nothing in this guide precludes an AHJ from adding additional requirements.4.9 This guide does not stand alone but must be used with the reference documents to provide the specific minimum training needed by a ground searcher and/or rescuer operating in these areas.4.10 This guide can be used as a reference for training of searchers, rescuers, or both.4.11 The information presented in the following sections is not in any particular order and does not represent a training sequence.4.12 It is the responsibility of the AHJ to determine the evaluation process to assess a person’s knowledge. This may be by written exam, oral exam, demonstration, or some other means specified by the AHJ.1.1 This guide is intended for training those who normally work in natural environments, solely subject to terrain and weather-related risks, who may be asked to respond to, or who may encounter, the operations defined in 1.2.1.2 This guide identifies and describes hazardous situations and environments, and the associated risks affecting search and rescue personnel who may be working on or around the following:1.2.1 Landsearch;1.2.2 Land rescue;1.2.3 Structural collapse;1.2.4 Rope rescues;1.2.5 Confined spaces;1.2.6 Water, both still and moving; and1.2.7 Trench or excavation collapse.1.3 The knowledge conveyed in this guide is intended to enable search and rescue (SAR) personnel to recognize situations that may require skills or capabilities they have not been trained to perform. This understanding will allow them to seek more knowledgeable personnel to mitigate the hazard and perform such rescues or other activities required to complete their mission.1.4 This guide is not intended to suggest that all search and rescue personnel must have the training identified within it. However, wherever the authority having jurisdiction (AHJ) deems this training to be appropriate, this document can be used as a guide.1.5 The AHJ shall determine what level of training constitutes sufficient competence for search and rescue personnel to enter areas, or carry out missions, which include the hazards described in this guide.1.6 This guide identifies some of the known disciplines of SAR and their associated hazards. It does not, however, attempt to list all hazards or risks of which a person must be aware to operate safely and effectively in and around any of the areas listed in 1.1.1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F2890-17
标准名称:
Standard Guide for Hazard Awareness for Search and Rescue Personnel
英文名称:
Standard Guide for Hazard Awareness for Search and Rescue Personnel标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS/NZS 3200.2.17:1994/Amdt 1:1997 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Remote-controlled automatically-driven gamma-ray afterloading equipment
- AS/NZS 3350.2.17:2000/Amdt 1:2001 Safety of household and similar electrical appliances Particular requirements - Blankets, pads and similar flexible heating
- AS/NZS 3350.2.17:2000/Amdt 3:2007 Safety of household and similar electrical appliances Particular requirements - Blankets, pads and similar flexible heating appliances (IEC 60335-2-17:1998, MOD)
- AS/NZS 4456.17:2003/Amdt 1:2004 Masonry units, segmental pavers and flags - Methods of test Determining initial rate of absorption (suction)
- AS/NZS 60079.17:2009/Amdt 1:2011 Explosive atmospheres Electrical installations inspection and maintenance
- AS/NZS 60335.2.17:2004/Amdt 2:2009 Household and similar electrical appliances - Safety Particular requirements for blankets, pads, clothing and similar flexible heating appliances (IEC 60335-2-17 Ed 2.2, MOD)
- AS/NZS 60598.2.17:2006 Luminaires Particular requirements - Luminaires for stage lighting, television, film and photographic studios (outdoor and indoor)(IEC 60598.2.17, Ed. 1.0 (1984) MOD)
- AS/NZS 60745.2.17:2003 Hand-held motor-operated electric tools - Safety - Particular requirements for routers and trimmers
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
- ASTM A1-00(2018) Standard Specification for Carbon Steel Tee Rails
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM A1001-18 Standard Specification for High-Strength Steel Castings in Heavy Sections
- ASTM A1002-16(2020) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
- ASTM A1004/A1004M-99(2018) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members