
【国外标准】 Lamp Controlgear - Part 2-3: Particular Requirements for A.C. Supplied Electronic Ballasts for Fluorescent Lamps (Adopted CEI/IEC 61347-2-3:2000, first edition, 2000-10, with Canadian deviations)
本网站 发布时间:
- CAN/CSA-E61347-2-3-03
- 现行
- 定价: 728元 / 折扣价: 619 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This is the first edition of CAN/CSA-E61347-2-3, Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied
electronic ballasts for fluorescent lamps, which is an adoption, with Canadian deviations, of the identically titled CEI/IEC (Commissi
标准号:
CAN/CSA-E61347-2-3-03
标准名称:
Lamp Controlgear - Part 2-3: Particular Requirements for A.C. Supplied Electronic Ballasts for Fluorescent Lamps (Adopted CEI/IEC 61347-2-3:2000, first edition, 2000-10, with Canadian deviations)
英文名称:
Lamp Controlgear - Part 2-3: Particular Requirements for A.C. Supplied Electronic Ballasts for Fluorescent Lamps (Adopted CEI/IEC 61347-2-3:2000, first edition, 2000-10, with Canadian deviations)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-E60974-5-03 Arc Welding Equipment - Part 5: Wire Feeders (Adopted CEI/IEC 60974-5:2002, first edition, 2002-02, with Canadian deviations)
- 下一篇: CAN/CSA-E61347-2-3A-03 Amendment 1:2005 to CAN/CSA-E61347-2-3-03, Lamp Controlgear - Part 2-3: Particular Requirements for A.C. Supplied Electronic Ballasts for Fluorescent Lamps (Adopted Amendment 1:2004 to CEI/IEC 61347-2-3:2000)
- 推荐标准
- ASTM D632-12(2020)e1 Standard Specification for Sodium Chloride
- ASTM D6358-19e1 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods
- ASTM D6379-21e1 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
- ASTM D6416/D6416M-16e1 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
- ASTM D6514-03(2019)e1 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
- ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
- ASTM D6557-18e1 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
- ASTM D6570-18a(2023)e1 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
- ASTM D6602-13(2022)e1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
- ASTM D664-18e2 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM D6794-20e1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time
- ASTM D6796-21e1 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
- ASTM D6808-02(2018)e1 Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
- ASTM D6881/D6881M-03(2020) Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
- ASTM D6887-03(2020) Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions