您的位置：
快3网下载安装到手机 >>
全部标准分类 >>
国外标准 >>
IEEE >>
IEEE 896.4-1993 [ Withdrawn ] IEEE Standard for Conformance Test Requirements for Futurebus+(R)

【国外标准】 IEEE Standard for Conformance Test Requirements for Futurebus+(R)

本网站发布时间： 2025-04-28

IEEE 896.4-1993 [ Withdrawn ]
定价： 224元 / 折扣价： 191 元
在线阅读

开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！查看详情>>

标准简介

适用范围：

This standard defines tester-independent conformance test procedures for Futurebus+. Specifically, this standard includes test procedures for verifying a module's conformance to the requirements of ISO/IEC 10857 : 19941 and sections 3 and 4 of IEEE Std 896.2-1991. This standard does not include test procedures for physical layer or performance-related requirements defined by the profile specification sections of IEEE Std 896.2-1991 or of any other Futurebus+ standards. Because the requirements contained in the non-profile sections of ISO/IEC 10857 : 1994 and IEEE Std 896.2-1991 are for the logical layer, this is primarily a logical layer test standard. Section 9 contains tests for those electrical requirements that are: a) part of ISO/IEC 10857 : 1994 and b) not profile specific. Since the majority of the requirements for the bus signaling environment are contained in profiles, the tests in section 9 of this standard are not, nor are they intended to be, a complete set of electrical tests for any Futurebus+ profile. Similarly, section 4 of IEEE Std 896.2-1991 contains mainly description and points to profile for the requirements governing the implementation of live insertion. Since this is the case, no live insertion tests are included in this standard. Readers interested in tests for these requirements should look to ongoing standardization efforts for Futurebus+ electrical and live insertion requirements and for Futurebus+ profiles. This standard is intended for use in verifying the conformance of Futurebus+ modules to the Futurebus+ family of standards. Some of the information may be useful in performing production tests and tests that measure a module's level of performance, but these types of testing are not within the scope of this standard. This standard is intended for the use of Futurebus+ manufacturers, users, and third-party test agencies. Use of a single test standard should allow different testers to arrive at similar test results.

基本信息

标准号：
IEEE 896.4-1993 [ Withdrawn ]
标准名称：
IEEE Standard for Conformance Test Requirements for Futurebus+(R)
英文名称：
标准状态：
发布日期：
实施日期：
出版语种：

标准分类号

标准ICS号：
中标分类号：

关联标准

替代以下标准：
被以下标准替代：
引用标准：
采用标准：

出版信息

页数：
字数：
开本：

其他信息

起草人：
起草单位：
归口单位：
提出部门：
发布部门：

其它标准

推荐标准