
【国外标准】 INCITS Technical Report for Information Technology Fibre Channel Avionics Environment Anonymous Subscriber Messaging (FC-AE-ASM)

适用范围:
Fibre Channel Avionics Environment (FC-AE), Technical Report INCITS TR-31-2002 [2], is a group of protocols and profiles that specify Fibre Channel options for devices connected by fabric and/or loop topologies that are pertinent to their use in commercial and military aerospace industries. The primary areas of interest include avionic command, control, instrumentation, simulation, signal processing, and sensor/video data distribution. These application areas are characterized by a variety of requirements, among them a need for high reliability, fault tolerance, and deterministic behavior to support real-time control/response.
The FC-AE-2 task group determined that it was best to allow profiles defined in the FC-AE technical report to be updated independently. This technical report is the first update to the FC-AE-ASM protocol since FC-AE was released. This technical report is recommended for new designs, but does not obsolete clause 4.1 in INCITS TR-31-2002 [2].
The primary objective of this technical report is to maximize the likelihood of interoperability between conforming implementations. This technical report Prohibits or Requires features that are optional and Prohibits the use of some non-optional features in the referenced ANSI INCITS standards. A second objective of this technical report is to simplify implementations and their associated documentation, testing, and support requirements. This technical report does not define internal characteristics of conformant implementations. This technical report incorporates features from the referenced ANSI INCITS standards.
标准号:
INCITS/TR-41-2006 (R2021)
标准名称:
INCITS Technical Report for Information Technology Fibre Channel Avionics Environment Anonymous Subscriber Messaging (FC-AE-ASM)
英文名称:
INCITS Technical Report for Information Technology Fibre Channel Avionics Environment Anonymous Subscriber Messaging (FC-AE-ASM)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS/TR-41-2006 (R2016) INCITS Technical Report for Information Technology v Fibre Channel v Avionics Environment v Anonymous Subscriber Messaging (FC-AE-ASM)
- 下一篇: INCITS/TR-41-2006/AM 1-2008 (R2019) INCITS Technical Report for Information Technology - Fibre Channel - Avionics Environment - Anonymous Subscriber Messaging - Amendment 1 (FC-AE-ASM/AM1)
- 推荐标准
- ASTM F3273-17(2021)e1 Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700)
- ASTM F585-16(2021) Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
- ASTM F667/F667M-16(2021) Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
- ASTM F746-04(2021) Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
- ASTM F913-02(2021) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
- ASTM G141-09(2021) Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
- ASTM G152-13(2021) Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G153-13(2021) Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G188-05(2021) Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
- ASTM G189-07(2021)e1 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
- ASTM G21-15(2021)e1 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
- ASTM G38-01(2021) Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
- ASTM G5-14(2021) Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
- ASTM G64-99(2021) Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
- ASTM G75-15(2021) Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)