
【国外标准】 Standard Guide for Using Equipment and Assays for Field Detection of Fentanyl and Fentanyl-Related Compounds
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 This guide includes a wide range of technologies that are currently in use. Considerations and guidance for using these technologies are listed in each technology section.5.2 The guide was compiled with significant input, review, and feedback from first responders; assay and instrument manufacturers; and local, state, and federal SMEs.1.1 This guide provides end-users and practitioners with information on the optimal use and limitations of assays and instrumentation designed to detect fentanyl and fentanyl-related compounds.1.2 This guide also provides summaries and links to guidance documents on training, personal protective equipment (PPE), sampling and detection, and medical countermeasures.1.3 This guide is intended for first responders and other end-users of field detection assays or instruments used to detect fentanyl and fentanyl-related compounds while out in the field. These instruments could also be used in a laboratory setting.1.4 End-users will need to determine specific requirements including, but not limited to, use by hazardous material (HAZMAT) teams, use in explosive or other hazardous environments or atmospheres, use with PPE, use by firefighters or law enforcement officers, special electromagnetic compatibility needs, extended storage periods, and extended mission times. These specific requirements may or may not be generally applicable to all chemical detection systems.1.5 Units: 1.5.1 The metric system is used for all measures of weight. All temperatures are given in °C.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E3289-21
标准名称:
Standard Guide for Using Equipment and Assays for Field Detection of Fentanyl and Fentanyl-Related Compounds
英文名称:
Standard Guide for Using Equipment and Assays for Field Detection of Fentanyl and Fentanyl-Related Compounds标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 推荐标准
- ASTM B1-13(2018) Standard Specification for Hard-Drawn Copper Wire
- ASTM B100-20 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
- ASTM B1002-16(2020) Standard Specification for Refined Indium
- ASTM B1003-16(2023) Standard Specification for Seamless Copper Tube for Linesets
- ASTM B1004-16(2022) Standard Practice for Contact Performance Classification of Electrical Connection Systems
- ASTM B1005-17(2023) Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)
- ASTM B1008-18 Standard Test Method for Stress-Strain Testing for Overhead Electrical Conductors
- ASTM B1010/B1010M-19 Standard Specification for Copper-Clad Steel Electrical Conductor for Tracer Wire Applications
- ASTM B1011/B1011M-22 Standard Specification for Cobalt Alloy Spring Wire
- ASTM B1013-22 Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy Thin Wall Die Castings
- ASTM B1014-20 Standard Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s)
- ASTM B1019-21 Standard Test Method for Determination of Surface Oxides on Copper Rod(for Electrical Purposes)
- ASTM B1020/B1020M-22 Standard Specification for Seamless Nickel Alloy Mechanical Tubing and Hollow Bar
- ASTM B1021-21 Standard Test Method for Peel Resistance of Metal Sheets Joined by High Strength Bonds
- ASTM B1022-22 Standard Specification for Zinc-Aluminum-Magnesium Alloys in Ingot Form for Coating Steel Sheet by the Hot-Dip Process