
【国外标准】 Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps (Withdrawn 2015)
本网站 发布时间:
2024-02-28
- ASTM E2530-06
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Careful use of this practice can yield calibrated z-magnifications traceable to the SI unit of length with uncertainties (k = 2) of approximately 7 % over height ranges of approximately 1 nm.1.1 This practice covers a measurement procedure to calibrate the z-scale of an atomic force microscope using Si(111) monatomic step height specimens.1.2 Applications This procedure is applicable either in ambient or vacuum condition when the atomic force microscope (AFM) is operated at its highest levels of z-magnification, that is, in the nanometer and sub-nanometer ranges of z-displacement. These ranges of measurement are required when the AFM is used to measure the surfaces of semiconductors, optical surfaces, and other high technology components.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM E2530-06
标准名称:
Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps (Withdrawn 2015)
英文名称:
Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps (Withdrawn 2015)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D4953-20 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
- ASTM D4954-89(2017) Standard Test Method for Determination of Nitrilotriacetates in Detergents
- ASTM D4957-18 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer
- ASTM D4958-24 Standard Test Method for Comparison of the Brush Drag of Latex Paints
- ASTM D4960-20 Standard Test Method for Evaluation of Color for Thermoplastic Pavement Marking Materials
- ASTM D4963/D4963M-22 Standard Test Method for Ignition Loss of Glass Fiber Strands and Fabrics
- ASTM D4964-96(2020) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- ASTM D4967-21 Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing, and Strength Components in Fiber-Optic Cables
- ASTM D4968-19a Standard Practice for Annual Review of Test Methods and Specifications for Plastics
- ASTM D4969-17(2022) Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric
- ASTM D4972-19 Standard Test Methods for pH of Soils
- ASTM D4976-12a(2020) Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
- ASTM D4977/D4977M-20 Standard Test Method for Granule Adhesion to Mineral-Surfaced Roofing by Abrasion
- ASTM D4981-19 Standard Practice for Screening of Oxidizers in Waste
- ASTM D4982-20 Standard Test Methods for Flammability Potential Screening Analysis of Waste