
【国外标准】 Standard Test Method for Detection of Nitric Oxide Production In Vitro
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 This test method is designed to evaluate nanomaterial capacity to induce nitric oxide production by macrophages.5.2 Activated macrophages generate large quantities of NO. NO generated from activated macrophages is a cytostatic/cytotoxic agent (3-6).5.3 The production of NO in excessive amounts leads to the generation of peroxynitrite by its spontaneous reaction with superoxide. Peroxynitrite causes tissue injury through its capability to damage lipids, proteins, and DNA (2).5.4 NO is a proinflammatory mediator and it is an important marker for activation of inflammation (5, 6).5.5 Testing the capacity of a nanomaterial to induce NO production in vitro helps in predicting the nanomaterial’s biocompatibility through anticipating and understanding the potential problems that might be encountered during its in vivo administration.1.1 This test method delivers a protocol for a quantitative measure of nitrite (NO2–), a stable end-product of nitric oxide (NO), in cell culture medium due to exposure to nanomaterial(s).1.2 NO has a critical role in several pathological conditions in addition to its role in many physiological processes.1.3 This test method uses murine macrophage cell line RAW 264.7 as an in vitro model.1.4 The nitrite is measured in the cell culture medium by a colorimetric analysis using Griess reagent as shown in Fig. 1.FIG. 1 Summary of Nitric Oxide Production Assay1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E3351-22
标准名称:
Standard Test Method for Detection of Nitric Oxide Production In Vitro
英文名称:
Standard Test Method for Detection of Nitric Oxide Production In Vitro标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM B1-13(2018) Standard Specification for Hard-Drawn Copper Wire
- ASTM B100-20 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
- ASTM B1002-16(2020) Standard Specification for Refined Indium
- ASTM B1003-16(2023) Standard Specification for Seamless Copper Tube for Linesets
- ASTM B1004-16(2022) Standard Practice for Contact Performance Classification of Electrical Connection Systems
- ASTM B1005-17(2023) Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)
- ASTM B1008-18 Standard Test Method for Stress-Strain Testing for Overhead Electrical Conductors
- ASTM B1010/B1010M-19 Standard Specification for Copper-Clad Steel Electrical Conductor for Tracer Wire Applications
- ASTM B1011/B1011M-22 Standard Specification for Cobalt Alloy Spring Wire
- ASTM B1013-22 Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy Thin Wall Die Castings
- ASTM B1014-20 Standard Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s)
- ASTM B1019-21 Standard Test Method for Determination of Surface Oxides on Copper Rod(for Electrical Purposes)
- ASTM B1020/B1020M-22 Standard Specification for Seamless Nickel Alloy Mechanical Tubing and Hollow Bar
- ASTM B1021-21 Standard Test Method for Peel Resistance of Metal Sheets Joined by High Strength Bonds
- ASTM B1022-22 Standard Specification for Zinc-Aluminum-Magnesium Alloys in Ingot Form for Coating Steel Sheet by the Hot-Dip Process