您的位置：
快3网下载安装到手机 >>
全部标准分类 >>
国外标准 >>
ASTM >>
ASTM C134-95(2023) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick

【国外标准】 Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick

本网站发布时间： 2024-02-28

ASTM C134-95(2023)
Active
定价：515元 / 折扣价： 438 元
加购物车
在线阅读

开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！查看详情>>

标准简介

适用范围：

3.1 Refractory brick are used as modular units in furnace construction and should not deviate significantly from the intended configuration with respect to size, bulk density, flat surfaces, and right angles. These test methods are particularly suited for use under field conditions and provide a means to determine whether the brick meets the requirements considered necessary to assure a satisfactory refractory construction.1.1 These test methods cover procedures for measuring size, dimensional measurement, bulk density, warpage, and squareness of rectangular dense refractory brick and rectangular insulating firebrick. More precise determination of bulk density of refractory brick can be made by Test Methods C20. Stack height is generally determined only for dense refractories.NOTE 1: Test Methods C830 and Test Method C914 are also used to determine bulk density of refractory brick, by different procedures.1.2 The test methods appear in the following order: SectionsSize and Bulk Density 4 through 7Warpage of Refractory Brick 8 through 10Squareness of Refractory Brick 11 through 141.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

基本信息

标准号：
ASTM C134-95(2023)
标准名称：
Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
英文名称：
Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
标准状态：
Active
发布日期：
实施日期：
出版语种：

标准分类号

标准ICS号：
81.080
中标分类号：

关联标准

替代以下标准：
被以下标准替代：
引用标准：
采用标准：

出版信息

页数：
4 页
字数：
开本：

其他信息

起草人：
起草单位：
归口单位：
C08.03
提出部门：
发布部门：

其它标准

推荐标准