购物车
400-168-0010
【国外标准】 Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4)
本网站 发布时间：
2023-12-22
开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！
查看详情>>
标准简介适用范围：
暂无
标准号：
BS HR 5:1972
标准名称：
Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4)
英文名称：
Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4)标准状态：
被代替-
发布日期：
1972-10-27 -
实施日期：
出版语种：
- 其它标准
- 上一篇： BS HR 55:1980 Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)
- 下一篇： BS HR 650:1972 Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 20 mm)
- 推荐标准
- ASTM F1972-19 Standard Guide for Terminology Relating to Candles and Associated Accessory Items
- ASTM G5-14(2021) Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
- ASTM C5-18 Standard Specification for Quicklime for Structural Purposes
- AS/NZS 3894.5:1995 Site testing of protective coatings Determination of surface profile
- AS/NZS 3947.5.1:2000 Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices
- AS/NZS 3947.5.3:2000 Low-voltage switchgear and controlgear Control circuit devices and switching elements - Requirements for proximity devices with define behaviour under fault conditions
- AS/NZS 3947.5.5:2000 Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
- AS/NZS 3947.5.6:2000 Low-voltage switchgear and controlgear Control circuit devices and switching elements - D.C.interface for proximity sensors and switching amplifiers (NAMUR)
- AS/NZS 4266.5:1995/Amdt 1:1997 Reconstituted wood-based panels - Methods of test - Determination of bending strength (MOR) and stiffness (MOE)
- AS/NZS 4387.5:1996 Domestic kitchen assemblies - Methods of test Determination of strength of hinged doors
- AS/NZS 4456.5:2003/Amdt 1:2004 Masonry units, segmental pavers and flags - Methods of test Determining the breaking load of segmental pavers and flags
- AS/NZS 4456.5:2003/Amdt 2:2009 Masonry units, segmental pavers and flags - Methods of test Determining the breaking load of segmental pavers and flags
- AS/NZS 4475.5:1997 Restraint systems for motor vehicles - Performance tests Determination of locking angle of a tilt-lock adjustment device
- AS/NZS 4492.5(Int):1997 Wool - Fleece testing and measurement Measurement of mean fibre diameter using the OFDA measuring system
- AS/NZS 4502.5:1997 Methods for evaluating clothing for protection against heat and fire Evaluation of the contact heat transmission through material and material assemblies
