
【国外标准】 IEEE Guide for Liquid-Immersed Transformers Through-Fault-Current Duration
本网站 发布时间:
2025-04-28
- IEEE C57.109-2018
- 定价: 57元 / 折扣价: 49 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This guide applies to transformers referenced in IEEE Std C57.12.00 as Categories I, II, III, and IV.1 It sets forth recommendations essential for the application of overcurrent protective devices applied to limit the exposure time of transformers to short-circuit currents (see IEEE Std C37.91™ [B2]).2 This guide is not intended to imply overload capability.
标准号:
IEEE C57.109-2018
标准名称:
IEEE Guide for Liquid-Immersed Transformers Through-Fault-Current Duration
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM E1459-13(2018) Standard Guide for Physical Evidence Labeling and Related Documentation
- ASTM E1646-95(2018) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
- ASTM E1665-95a(2018) Standard Classification for Serviceability of an Office Facility for Facility Protection
- ASTM E1668-95a(2018) Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
- ASTM E1669-95a(2018) Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
- ASTM E1670-95a(2018) Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
- ASTM E1692-95a(2018) Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
- ASTM E1938-13(2018) Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
- ASTM E1957-04(2018) Standard Practice for Installing and Using Pneumatic Tubes With Roadway Traffic Counters and Classifiers
- ASTM E196-06(2018) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
- ASTM E1998-11(2018) Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
- ASTM E2134/E2134M-14(2018) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
- ASTM E2139-05(2018) Standard Test Method for Same-Different Test
- ASTM E2203-14(2018) Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
- ASTM E2208-02(2018)e1 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems