
【国外标准】 Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 The process of selection, training and qualification of personnel involved with NDA measurements is one of the quality assurance elements for an overall quality NDA measurement program.4.2 This guide describes an approach to selection, qualification, and training of personnel that is to be used in conjunction with other NDA Quality Assurance (QA) program elements. The selection, qualification and training processes can vary and this guide provides one such approach.4.3 The qualification activities described in this guide assume that NDA personnel are already proficient in general facility operations and safety procedures. The training and activities that developed this proficiency are not covered in this guide.4.4 This guide describes a basic approach and principles for the qualification of NDA professionals and technical specialists and operators. A different approach may be adopted by the management organization based on its particular organization and facility specifics. However, if a variation of the approach of this guide is applied, the resulting selection, training, and qualification programs must meet the requirements of the facility quality assurance program and should provide all the applicable functions of Section 5.4.5 This guide may be used as an aid in the preparation of a Training Implementation Plan (TIP) for the Transuranic Waste Characterization Program (TWCP).4.6 This guide describes education and expertise guidance for NDA auditors due to the importance and complexity of proper oversight of NDA activities.1.1 This guide contains good practices for the selection, training, qualification, and professional development of personnel performing analysis, calibration, physical measurements, or data review using nondestructive assay equipment, methods, results, or techniques. The guide also covers NDA personnel involved with NDA equipment setup, selection, diagnosis, troubleshooting, or repair. General guidelines for the selection, training, and qualification of NDA auditors are included as well, but at a lower level of detail due to the variability of the personnel’s responsibilities performing this functions. Selection, training, and qualification programs based on this guide are intended to provide assurance that NDA personnel are suitably qualified and experienced personnel (SQEP) to perform their jobs competently. This guide presents a series of options but does not recommend a specific course of action.This standard guide does not address the qualifications per se of an NDA Manager. However, it is expected that the NDA Manager is familiar with NDA techniques, and can make informed decisions on the acceptability of the assay results. If an NDA Manager does not have adequate technical qualifications in the NDA field, they are recommended to undergo training to gain familiarity in this area.An NDA Manager with no relevant NDA experience should have access to a Senior NDA Professional who will give guidance for all technical decisions such as applicability and limitation of methods, reasonableness of results, needed upgrades and advantageous development investments.1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM C1490-14(2023)
标准名称:
Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel
英文名称:
Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS/NZS 2023:1995 Baths for ablutionary purposes
- AS/NZS 2891.14.1.2:1999 Methods of sampling and testing asphalt Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Backscatter mode
- AS/NZS 2891.14.2:1999 Methods of sampling and testing asphalt Field density tests - Determination of field density of compacted asphalt using a nuclear thin-layer density gauge
- AS/NZS 2891.14.4:1999 Methods of sampling and testing asphalt Field density tests - Calibration of nuclear surface moisture-density gauge - Backscatter mode
- AS/NZS 2891.14.5:1999 Methods of sampling and testing asphalt Field density tests - Density ratio of compacted asphalt
- AS/NZS 3350.2.14:1995/Amdt 3:2001 Safety of household and similar electrical appliances - Particular requirements
- AS/NZS 3350.2.14:1995/Amdt 4:2008 Safety of household and similar electrical appliances Particular requirements for kitchen machines
- AS/NZS 3750.14:1997 (R2013) Paints for steel structures High-build epoxy (two-pack)
- AS/NZS 4266.14:1995 Reconstituted wood-based panels - Methods of test Determination of dimensional change with relative humidity
- AS/NZS 4387.14:1996 Domestic kitchen assemblies - Methods of test Determination of strength of handles
- AS/NZS 4456.14:2003/Amdt 1:2004 Masonry units, segmental pavers and flags - Methods of test Determining water absorption properties
- AS/NZS 4456.14:2003/Amdt 2:2009 Masonry units, segmental pavers and flags - Methods of test Determining water absorption properties
- AS/NZS 4524.14:1998 Bonded abrasive products - Dimensions Grinding wheels for deburring and fettling/snagging on an angle grinder
- AS/NZS 60079.14:2009/Amdt 1:2011 Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed 4.0 (2007) MOD)
- AS/NZS 60335.2.14:2013 Household and similar electrical appliances - Safety Particular requirements for kitchen machines (IEC 60335-2-14 Ed 5.2, MOD)