
【国外标准】 Standard Test Methods for Fire Tests of Building Construction and Materials
本网站 发布时间:
2025-04-27
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
ASTM E119-24
标准名称:
Standard Test Methods for Fire Tests of Building Construction and Materials
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM E1307-18(2025) Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
- 下一篇: ASTM E1155M-14 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers (Metric) (Withdrawn 2023)
- 推荐标准
- AS 1038.24-1998 (R2013) Coal and coke - Analysis and testing Guide to the evaluation of measurements made by on-line coal analysers
- AS 1141.24-1997 Methods for sampling and testing aggregates Aggregate soundness - Evaluation by exposure to sodium sulfate solution
- AS 1683.24-1984 Methods of test for rubber Rubber - Vulcanized - Determination of resistance to ozone cracking - Static strain test
- AS 1774.24-1997 Refractories and refractory materials - Physical test methods Resistance to thermal shock
- AS 1807.24-2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of recovery times of cleanrooms
- AS 2362.24-1996 Automatic fire detection and alarm systems - Methods of test for actuating devices Frangibility test
- ASTM D6099-18 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
- ASTM D610-08(2019) Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
- ASTM D6100-17 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
- ASTM D6104-97(2017)e1 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
- ASTM D6105-04(2019) Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
- ASTM D6107-97(2023) Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
- ASTM D6108-19 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
- ASTM D611-23 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
- ASTM D6111-19a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement