
【国外标准】 Standard Guide for Artists' Paint Waste Disposal in Smaller Commercial or Educational Settings (Withdrawn 2019)
本网站 发布时间:
2024-02-28
- ASTM D7355-10
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Persons using artists' paints produce waste that could be harmful to the environment if released without precaution. Currently, may of these wastes are being released into the environment through ground or sanitary sewer disposal thus negatively impacting the environment. This is a particular problem with paints mixed with water, as they might be regulated because of the metals contained in the pigments used in artist's paint products, though many users are not aware of this environmental concernThis guide establishes recommendations for the environmentally responsible clean up and disposal of waste produce by users of artists' paint products and solvents. It does not supersede laws or regulations, but recommends prudent practices.This guide's use should be limited to small commercial or educational settings and be considered as one way to meet regulatory requirements. In larger educational and commercial settings, an internal environmental compliance office or a local regulatory office should be consulted to determine if this guide will work within their requirements.1.1 This guide establishes recommendations for the safe and environmentally friendly clean up and disposal of artists' paints and by-products of their use in a smaller commercial or educational setting.1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
标准号:
ASTM D7355-10
标准名称:
Standard Guide for Artists' Paint Waste Disposal in Smaller Commercial or Educational Settings (Withdrawn 2019)
英文名称:
Standard Guide for Artists' Paint Waste Disposal in Smaller Commercial or Educational Settings (Withdrawn 2019)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM F3275-22 Standard Guide for Using a Force Tester to Evaluate Performance of a Brush Part Designed to Clean the Internal Channel of a Medical Device
- ASTM F3276-22 Standard Guide for Using a Force Tester to Evaluate the Performance of a Brush Part Designed to Clean the External Surface of a Medical Device
- ASTM F3277-19 Standard Specification for Cantilevered Steel Bunks Used in Detention and Correctional Facilities
- ASTM F3283/F3283M-18 Standard Specification for the Manufacturing of High-Voltage Proximity Alarm to be used for the Detection of Overhead High Voltage Alternating Current (AC)
- ASTM F3288/F3288M-20 Standard Specification for MRS-Rated Metric- and Inch-sized Crosslinked Polyethylene (PEX) Pressure Pipe
- ASTM F3292-19 Standard Practice for Inspection of Spinal Implants Undergoing Testing
- ASTM F3293-18 Standard Guide for Application of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices
- ASTM F3294-18 Standard Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy
- ASTM F3295-18 Standard Guide for Impingement Testing of Total Disc Prostheses
- ASTM F330-21 Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
- ASTM F3300-23 Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
- ASTM F3301-18a Standard for Additive Manufacturing – Post Processing Methods – Standard Specification for Thermal Post-Processing Metal Parts Made Via Powder Bed Fusion
- ASTM F3302-18 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
- ASTM F3306-19 Standard Test Method for Ion Release Evaluation of Medical Implants
- ASTM F3308/F3308M-19(2023) Standard Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene (PE) Pipe for Non-Pressure Applications